Variety of shock devices

Timely application of DC shock device in pre-hospital system is for a conscious patient to save his life. Pre-hospital emergencies are an important part of the system. Provide health care services Existence of medical equipment such as Shock CD in ambulances In order to provide proper services, it is necessary. On the other hand, the main cause of 80 to 90% of deaths that occur due to cardiac arrest is the only definitive treatment defibrillations the most important point in the use of these devices Medical equipment, their timely use is principled according to the patient's clinical condition. A 57-year-old man called 115 Alborz emergency Department due to chest pain During the telephone triage, the necessary recommendations of the nearest ambulance to the emergency room will be taken. After 10 minutes, emergency medical technicians arrived at the patient's bedside. Upon arrival, the conscious patient is anxious in position face up Was present in a clinical examination of a palpable but thread-shaped pulse BP=80/P Skin Accompanied by sweating is also a history of the patient suffering from chest pain, weakness and lethargy Is a plaintiff Indicated the critical condition of the patient After the initial procedures to establish oxygen, the patient is transferred to the ambulance at the same time as the transfer She was placed on a heart monitor bed and showed the patient's rhythm of ventricular tachycardia On the advice of a doctor or physician depending on the distance Clinical condition of the patient's cardiac monitoring After diazepam injection cardioversion The heart will synchronize with 100 joules of shock finally, the patient was delivered to the hospital with a sinus BP=110/60 P=90 rhythm of full consciousness. Discussion Conclusion in recent years significant changes in the stages of cardiac function pulmonary created.

The use of shock is the most important part of the survival chain. If in the first minute start V.FFi brillation should be performed most successful in operations CPR will be obtained.

VT Pulse monomorphism responds well to synchronized shocks with monophasic waves with initial energies of 100 joules.

Existence of electroshock devices of trained personnel in pre-hospital emergencies can play an important role in resuscitation of heart patients.

The DC shock device must be carefully cared for. Principles must be followed in maintaining DC Shock. Here we want maintenance training Cleaning and visiting the DC Shock device learn to clean the device Pedals and cables the following methods are recommended: Soluble white alcohol and soap and water. A soft, damp cloth should be used to clean DC shock components.

Make sure that no part of the device is cleaned by pouring liquid water and alcohol. Cleaning the pedals after use should be done more carefully and the gel rubbed on the metal surface of the pedal should be completely cleaned from it.Avoid immersing the pedals in water.

Do not turn on the device immediately after cleaning.

Immediately after spilling liquids or serum on the device, disconnect the battery from the device and unplug it.

Patient resuscitation equipment should be maintained ready for immediate use.

The performance of the device should be checked at the beginning of each shift to ensure the correct operation of the device.

When visiting the DC Shock device, we must pay attention to some points.

The device should be clean. The metal surface of the pedals should be clean and free of any gel or dirt.

Check all cables for proper condition and no cuts or tears.

Shock the CD device after fully charging the battery. Make sure.

An electroconvulsive device is a device that delivers high-energy electric shocks to the heart.

The shock process is known as fibrillation.

The purpose of these shocks is to return the heart to its normal functional state after a cardiac arrest